|
LiFe 6,6V 2300mAh features: - Latest Technology LiFePO4 - Especially for 1 / 5 and 1 / 6 RC cars - Excellent power to weight ratio for racing - Renewable and sustainable - 108 grams - Futaba plug - 14AWG cable for plug-and-switch assembly - Replaces the current 6.0 V NiMH rechargeable batteries - Full load and maintenance instructions - Super low prices Specifications: Capacity: 2300mAh SCC: 2S1P Voltage: 6.6 V Weight: 108Gr Dimensions approx: 99 x 30 x 19.5 mm Power connector: Futaba connectors and 14AWG silicon wire Balance connector: plug-XH Charging current: 1.0 - 2.3 A / 0.5-1C Continuous discharge: 11A / 5C Peak discharge: 23A / 10C Maximum discharge voltage: 4.0 V / Pack Cell Protection: UN-certified test
34,90 EUR
|
|
|
 |
|
LiFe 6,6V 2000mAh features: - Last LiFePO4 Technology - Extra long race time - Quick charging 3C / 6A - Sustainable - Longevity - Futaba plug - Replaces the previous 6.0 V 2/3A 5-cell batteries - Full load and maintenance instructions - Super low prices Specifications: Capacity: 2000mAh SCC: 2S1P Voltage: 6.6 V Weight: 93gr Approx dimensions: 56x31x31mm Power connector: Futaba connector Balance connector: plug-SPD Charging current: 1-2A / 1C Continuous discharge: 10A / 5C Peak discharge: 20A / 10C Maximum discharge voltage: 4.0 V / Pack Cell Protection: UN-certified tes
21,50 EUR
|
|
|
|
|
LiFe 6,6V 1600mAh features: - Last LiFePO4 Technology - Extra long race time - Quick charging 3C / A 4.8 - sustainable - Longevity - Futaba plug - Replaces the previous 6.0 V 2/3A 5-cell batteries - Full load and maintenance instructions - Super low prices Specifications: Capacity: 1600mAh SCC: 2S1P Voltage: 6.6 V Weight: 79 gr Dimensions approx: 88x34x14 mm Power connector: Futaba connector Balance connector: plug-SPD Charging current: 0.8 to 4.8 A / 0.5-3C Continuous drain: 6.4 A / 4C Peak Discharge: 9.6 A / 6C Maximum discharge voltage: 4.0 V / Pack Cell Protection: UN-certified test
23,50 EUR
|
|
|
|
|
power servo current supply The PSS power servo current supply has been developed in order to meet the requirements of models in big scale as well as of the modern high performance servos. A lipo-battery 7,4 V with two cells should be used as receiver battery. Advantage of this current supply is that the steering servo is supplied with full voltage but the throttle-brake servos as well as the transponder just with reduced voltage. This guarantees optimal use of the performance of high voltage servo. At the same time the receiver is released.
37,90 EUR
|
|
|
|
|
Lipo receiver battery 7,4 V/2600 mAh Advantages of the Lipo receiver battery: - no self-discharge - no memory effect, just reload - constant voltage through high load capacity - very light Weight: 100 g Dimensions: 75 mm x 48 mm x 13,7 mm
34,90 EUR
|
|
|
|
|
Charging lead for receiver battery Equipped with banana plugs and reverse battery gold contact strip system.
7,90 EUR
|
|
|
|
|
|
|
