|
Futaba Servo BLS 157 HV Futaba Servo BLS 157 HV The ultra-high power Brushless servo- High voltage (HV) - Servo with incredible 370 Ncm torque force. Direct use with 2S LiPo battery. 30% faster response time = acceleration better resistant to vibration and shock, higher efficiency, reduced motor heat no brush wear = 5 times the motor life special gear = virtually zero backlash Samarium Cobalt Motor Magnets higher resolution the same power consumption as conventional digital servos Technical data Rated voltage 2 downloads: 6 volt motor torque (6V): 310 Ncm Weight: 77 g Holding Torque (6V): 775 Ncm Dimensions: 40.5 x 21 x 38.4 mm servo speed (6V): 0.105 s/45 ° Holding torque : / 775Ncm/925Ncm servo speed: / 0.105s/45 ° / 0.0825 s/45 ° Nominal voltage: / 6Volt/7.4Volt force moment: / 310Ncm/370Ncm cells: 5 NiMH, 2S LiFe / 3 LiPo Voltage: 7.4 volts wide ca .: 21 mm Operating voltage: 6 .. 7.4 Volts
209,00 EUR
|
|
|
 |
|
Futaba S 3050 Digital Specifications: Size: 40x20x38.1 mm Dimensions / weight: 49.00 pond / g Operating voltage: 4.8 ... 6 Volts Torque: 52.00 Ncm Transit speed: 0.15 Sec/45 °
55,30 EUR
|
|
|
|
|
Futaba S 9152 Digital Specifications: Size: 48.6x25.2x39.7 mm Dimensions / weight: 85.00 pond / g Operating voltage: 4.8 ... 6 Volts Rated voltage: 4.80 V nominal voltage: 6.00 Volts Torque: 160.00 Ncm Torque: 200.00 Ncm Speed: 0.18 Sec/45 ° Speed: 0.14 Sec/45 ° Holding power: 400.00 Ncm Holding power: 500.00 Ncm
149,00 EUR
|
|
|
|
|
Futaba S 9157 Digital Specifications: Size: 40.5 x 21 x 37.4 mm Weight : 71 g Temperature range: -15 ... +55 ° C cell count: 4-5 NC / NiMH Rated voltage: 4.8 ... 6V Torque: 245 Ncm - 306 Ncm Speed: 0.13 00:11 Sec/45 Sec/45 ° ° Holding power: 612 Ncm - 765 Ncm
159,00 EUR
|
|
|
|
|
Futaba S 9254 Digital Specifications: Size: 40x20x36.6 mm Dimensions / weight: 49.00 pond / g Operating voltage: 4.8 ... 6 Volts Torque: 34.00 Ncm Torque: 34.00 Ncm Speed: 0.04 Sec/45 ° Speed: 0.04 Sec/45 ° Holding power: 85.00 Ncm
119,00 EUR
|
|
|
|
|
Futaba S 9350 Digital The Futaba S 9350 digital servo has a very large force of over 10 kg with excellent positioning speed 0.10sec It is mainly used by quality-conscious drivers big model to gas / brake or in a double on the steering.
139,00 EUR
|
|
|
|
|
Futaba S 9351 Digital 13 Kilo The Futaba S 9351 digital servo has a very large force of over 13 kg with excellent positioning speed 0.10sec It is mainly used by quality-conscious drivers big model to gas / brake or in a double on the steering.
139,00 EUR
|
|
|
|
|
Futaba S 9551 Digital Specifications: Size: 40.5x21x25.4 mm Dimensions / weight: 45.00 pond / g Operating voltage: 4.8 ... 6 Volts Torque: 79.00 Ncm Torque: 98.00 Ncm Speed: 0.10 Sec/45 ° speed: 0.09 Sec/45 ° Holding power: 197.00 Ncm Holding power: 245.00 Ncm.
114,00 EUR
|
|
|
|
|
Futaba Brushless BLS 351 MG Specifications: Size: 40x20x36.8 mm Dimensions / weight: 63.00 pond / g Operating voltage: 4.8-6V V Torque: 120.00 Ncm Torque: 150.00 Ncm Speed: 0.12 Sec/45 ° Speed: 0.10 Sec/45 ° Holding power: 300.00 Ncm Holding power: 375.00 Ncm
159,00 EUR
|
|
|
|
|
Futaba Brushless BLS 451 MG Specifications: Size: 40x20x36.8 mm Dimensions / weight: 58.00 pond / g Operating voltage: 4.8-6V V Torque: 85.00 Ncm Torque: 106.00 Ncm Speed: 0.10 Sec/45 ° Speed: 0.07 Sec/45 ° Holding power: 212.00 Ncm Holding power: 265.00 Ncm
115,00 EUR
|
|
|
|
|
Futaba Brushless BLS 452 MG Specifications: Size: 40 x 20 x 36.8 mm Dimensions / weight: 58.00 pond / g Power supply: 4,8-6 volts Rated voltage: 4.80 V nominal voltage: 6.00 Volts Torque: 112.00 Ncm Torque: 140.00 Ncm Speed: 0.14 Sec/45 ° Speed: 0.11 Sec/45 ° Holding power: 280.00 Ncm Holding power: 350.00 Ncm
119,00 EUR
|
|
|
|
|
Futaba Servo horn 44/50 mm Futaba servo horn, aluminum, anodized black, 44/50 mm
16,50 EUR
|
|
|
|
|
H.A.R.M. XS one Powerservo The right choise if you need torque, holding power and durability! Mechanical load as well as the requirements to setting and holding force with model cars 1/5 and 1/6 scale is constantly increased through improved technology of the vehicles and tyres. In the meantime servos in appropriate size with 30 kg setting force are offered on the parts of the manufacturers. Unfortunately these servos are mostly not appropriate as steering servo for model cars big scale as the mechanical load for gears and housing is too big. Due to this fact F. Pisoni from Italy looked into the available technology of servos big scale and realized a radical conversion on the basis of the Multiplex Rhino respectively Hitec 5745 servo which housing is identical with the Rhino servo. With the conversion a high-quality motor is mounted, the electronic is modified and some more changes and amendments are made in order to make the servo more stable, powerful, reliable and more effective. After the conversion the servo is almost water proof which is very important for Off-Road drivers. Further difference is the operation voltage. After the conversion the servo can be operated with 12 V what facilitates the use of e.g. two lipo batteries without problems. The drivers who tested the first modified servos have been deeply impressed. H.A.R.M. Racing heard of the project and concluded an agreement with F. Pisoni. This enables H.A.R.M. Racing now to offer this extraordinary technology also to a wide spread clientele. There are not just complete servos available, it is also possible to have an existing Multiplex Rhino or Hitec 5745 servo converted with H.A.R.M. Racing. Technical data of the H.A.R.M. XS one power servo: Dimensions: 59 x 29 x 55 mm Weight: ca. 170 g Torque: @ 6,0V: 25 kg-cm @ 7,6V: 30 kg-cm Transit speed: @ 6,0V: 0,09 sec @ 7,6V: 0,08 sec
189,00 EUR
|
|
|
|
|
Digital high current servo DS-8325HV The DS-8325HV is a high quality servo. The equipment with aluminium magnesium housing, corless motor, very fast setting times and incredible power make this servo perfect for large scale cars, especially as throttle/brake servo. The servo is capable of high voltage and can be operated directly with 2S Lipo. Size: 40 x 20 x 45 mm Weight: 79g Setting time @ 6V: 0,145sek./60° Setting time @ 7,4V: 0,118sek./60° Setting force @ 6V: 25kg-cm Setting force @7,4V: 31kg-cm Compare data and equipment, with this servo you will get what you pay for.
134,90 EUR
|
|
|
|
|
power servo current supply The PSS power servo current supply has been developed in order to meet the requirements of models in big scale as well as of the modern high performance servos. A lipo-battery 7,4 V with two cells should be used as receiver battery. Advantage of this current supply is that the steering servo is supplied with full voltage but the throttle-brake servos as well as the transponder just with reduced voltage. This guarantees optimal use of the performance of high voltage servo. At the same time the receiver is released.
37,90 EUR
|
|
|
|
|
|
|
